{"product_id":"ds106gpp","title":"DS106GPP - TP-Link Omada 6-Port Gigabit Unmanaged Desktop Switch with 3-Port PoE+ and 1-Port PoE++","description":"\u003cp\u003eThe \u003cstrong\u003eTP-Link DS106GPP\u003c\/strong\u003e is an \u003cstrong\u003eOmada 6-Port Gigabit Unmanaged Desktop Switch\u003c\/strong\u003e with \u003cstrong\u003e3 PoE+ ports and 1 PoE++ port\u003c\/strong\u003e, delivering data and power over a single cable. With a total \u003cstrong\u003e64 W PoE budget\u003c\/strong\u003e, it is a practical choice for \u003cstrong\u003eIP camera surveillance\u003c\/strong\u003e in offices, dormitories and small businesses. This DS106GPP is plug and play, so there is no configuration or central management required.\u003c\/p\u003e\u003cp\u003eCompliant with the \u003cstrong\u003eIEEE 802.3af\/at\/bt\u003c\/strong\u003e PoE standards, the switch supplies up to 60 W on the PoE++ port and up to 30 W on each PoE+ port. If total power consumption exceeds 64 W, \u003cstrong\u003eintelligent power management\u003c\/strong\u003e cuts power to lower-priority ports to protect your devices from damage.\u003c\/p\u003e\u003cp\u003eFor larger sites, the \u003cstrong\u003eExtend Mode\u003c\/strong\u003e toggle lets PoE data and power reach up to \u003cstrong\u003e250 m\u003c\/strong\u003e (820 ft) on supported ports, which is ideal for IP camera deployments across wide areas. Please note that port speed drops to 10 Mbps in Extend Mode, and the actual distance may vary with the power draw of the PoE device and the cable quality and type. \u003cstrong\u003ePoE Auto Recovery\u003c\/strong\u003e automatically detects and reboots cameras, access points and other powered devices that drop offline or become unresponsive, with no manual monitoring needed.\u003c\/p\u003e\u003cp\u003eHoused in a \u003cstrong\u003edurable metal casing\u003c\/strong\u003e with a \u003cstrong\u003efanless design\u003c\/strong\u003e for silent operation, the compact desktop unit (158 x 101 x 25 mm) can also be wall-mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6× 10\/100\/1000 Mbps RJ45 ports with Auto-Negotiation and Auto MDI\/MDIX\u003c\/li\u003e\n\u003cli\u003e1× PoE++ port (802.3af\/at\/bt, up to 60 W) and 3× PoE+ ports (802.3af\/at, up to 30 W each)\u003c\/li\u003e\n\u003cli\u003e64 W total PoE budget (PoE ports 1-4)\u003c\/li\u003e\n\u003cli\u003eExtend Mode for up to 250 m PoE power and data transmission (ports 1-2)\u003c\/li\u003e\n\u003cli\u003ePoE Auto Recovery (ports 1-4) for self-healing operation\u003c\/li\u003e\n\u003cli\u003eIntelligent power management protects against power overload\u003c\/li\u003e\n\u003cli\u003e802.1p\/DSCP QoS for smooth latency-sensitive traffic\u003c\/li\u003e\n\u003cli\u003eIGMP Snooping and IEEE 802.3x flow control\u003c\/li\u003e\n\u003cli\u003e12 Gbps switching capacity, 8.928 Mpps packet forwarding rate and 4K MAC address table\u003c\/li\u003e\n\u003cli\u003ePlug and play, with desktop or wall-mounting options\u003c\/li\u003e\n\u003cli\u003eFanless design and durable metal casing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIdeal for\u003c\/strong\u003e: small businesses, offices, dormitories and home offices that need a simple, silent, unmanaged PoE switch to power IP cameras, access points, IP phones and other PoE devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Products\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWorks with IEEE 802.3af\/at\/bt compliant powered devices (PDs), including IP cameras, wireless access points, IP phones, computers and printers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDS106GPP switch, power adapter and installation guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the Power LED not lit?\u003c\/strong\u003e\u003cbr\u003eMake sure the PSE and PD devices are connected to the corresponding ports properly, and that the PSE device is powered on and working normally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are PoE ports not supplying power for PoE devices?\u003c\/strong\u003e\u003cbr\u003eCheck that the cable is less than 100 metres (328 feet) long. If Extend Mode is enabled, it should be less than 250 metres (820 feet).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I note before using the PoE Auto Recovery feature?\u003c\/strong\u003e\u003cbr\u003eBefore upgrading a connected PD, disable PoE Auto Recovery to avoid damaging it. Also disable it if a PD does not send data to the switch for long periods (for example, an IP camera in sleep mode), to avoid the PD repeatedly rebooting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to port speed when Extend Mode is on?\u003c\/strong\u003e\u003cbr\u003eWith Extend Mode off, ports run at 10\/100\/1000 Mbps with PoE up to 100 m. With it on, ports run at 10 Mbps with PoE up to 250 m.\u003c\/p\u003e","brand":"TP-LINK","offers":[{"title":"Default Title","offer_id":62235477049484,"sku":"DS106GPP","price":143.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0598\/0304\/1932\/files\/DS106GPP_bb3cf3f2973e4011e1ac97359a0aba2f794843507dc2309de9964420700879de.jpg?v=1791251237","url":"https:\/\/thetechgeeks.com\/products\/ds106gpp","provider":"The Tech Geeks Australia","version":"1.0","type":"link"}