{"product_id":"watchguard-802-3at-poe-injector-with-ac-cord-au","title":"WG8602 - WatchGuard 802.3at PoE+ Injector with AC Cord (AU)","description":"\u003cp\u003eThe \u003cstrong\u003eWatchGuard WG8602 802.3at PoE+ Injector with AC cord (AU)\u003c\/strong\u003e is the official WatchGuard \u003cstrong\u003epower over Ethernet injector\u003c\/strong\u003e for powering WatchGuard \u003cstrong\u003eWi-Fi access points\u003c\/strong\u003e through an existing Ethernet connection. Supplied with an Australian-region AC cord, the WG8602 means you do not need to position your access point near a power outlet, making \u003cstrong\u003eaccess point deployment\u003c\/strong\u003e simpler and tidier.\u003c\/p\u003e\u003cp\u003eThis \u003cstrong\u003ePoE+ injector\u003c\/strong\u003e complies with IEEE 802.3at\/af PoE specifications and delivers up to 30W of output power, so it can supply the PoE+ (802.3at) power that WatchGuard's current access points need to operate at full capability. It is an ideal solution wherever a \u003cstrong\u003ePoE+ switch\u003c\/strong\u003e is not available on the network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIEEE 802.3at\/af\u003c\/strong\u003e compliant PoE+ injector\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e30W maximum output power\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input voltage range of 100-240VAC\u003c\/strong\u003e (0.8A maximum input current at 100VAC)\u003c\/li\u003e\n\u003cli\u003eLAN port: RJ-45 for \u003cstrong\u003e10\/100\/1000 Mbps\u003c\/strong\u003e data\u003c\/li\u003e\n\u003cli\u003ePoE port: RJ-45 for 10\/100\/1000 Mbps data and power\u003c\/li\u003e\n\u003cli\u003eSupplied with an \u003cstrong\u003eAU AC power cord\u003c\/strong\u003e (SKU WG8602)\u003c\/li\u003e\n\u003cli\u003eLets you power your access point over existing Ethernet cabling, removing the need for a nearby power outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIdeal for\u003c\/strong\u003e: IT administrators, network integrators and businesses deploying WatchGuard Wi-Fi access points in Australia where PoE+ switch ports are unavailable or limited.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Products\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe WG8602 is listed by WatchGuard as an optional Ethernet power injector in the hardware guides for WatchGuard access points, including the \u003cstrong\u003eAP330\u003c\/strong\u003e, \u003cstrong\u003eAP430CR\u003c\/strong\u003e, \u003cstrong\u003eAP432\u003c\/strong\u003e, \u003cstrong\u003eAP327X\u003c\/strong\u003e, \u003cstrong\u003eAP332CR\u003c\/strong\u003e and \u003cstrong\u003eAP325\u003c\/strong\u003e. Always check the hardware guide for your specific access point model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation at a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlug the injector into an AC power source, connect an Ethernet cable from your network backbone (such as a PoE-capable router, switch or hub) to the LAN connector, then connect a second Ethernet cable from the PoE connector to the LAN (PoE+) interface on the access point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant\u003c\/strong\u003e: Do not use PoE adapters that are not IEEE 802.3at\/af compliant, as they may damage your device. Some WatchGuard access points, such as the AP327X, support PoE+ (802.3at) only, and powering them with 802.3af PoE may result in limited functionality and device instability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standard does the WG8602 comply with?\u003c\/strong\u003e\u003cbr\u003eIt complies with IEEE 802.3at\/af PoE specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power can it deliver?\u003c\/strong\u003e\u003cbr\u003eThe maximum output power is 30W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat AC input does it accept?\u003c\/strong\u003e\u003cbr\u003eThe AC input voltage rating is 100-240VAC, with a maximum input current of 0.8A at 100VAC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich regional versions are available?\u003c\/strong\u003e\u003cbr\u003eWatchGuard offers WG8599 (US), WG8600 (EU), WG8601 (UK) and WG8602 (AU), differing by AC power cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use any PoE adapter instead?\u003c\/strong\u003e\u003cbr\u003eWatchGuard advises against PoE adapters that are not IEEE 802.3at\/af compliant, as they may damage your device.\u003c\/p\u003e","brand":"WatchGuard","offers":[{"title":"Default Title","offer_id":63454702829708,"sku":"WG8602","price":101.52,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0598\/0304\/1932\/files\/WG8602_11e86c97ab224186808111d83c37ec532f175da9ebeaab69634d91e84e5c37be.jpg?v=1792982666","url":"https:\/\/thetechgeeks.com\/products\/watchguard-802-3at-poe-injector-with-ac-cord-au","provider":"The Tech Geeks Australia","version":"1.0","type":"link"}