Free Shipping On Many Orders Over $385 (Exclusions Apply)

Chat To Us - 7am-10pm - 7 Days A Week

All Prices Include Australian GST At 10%

Manufacturer's photos. Where a power lead is pictured, an AU one is provided.

SKU: USL-ENVIRONMENTAL-US

USL-Environmental-US Ubiquiti SuperLink Environmental Sensor (US Version)

$101.48 AUD
20+ in stockShips from the warehouse closest to you
Brisbane (none in stock)Sydney (none in stock)MelbourneAdelaide (none in stock)Perth (none in stock)North Lakes
Pickup may be possible in North Lakes

We ship from partner warehouses, so pickup is not automatic. Choose delivery at checkout and contact us if you would like to arrange pickup.

Description

Please note that there are two versions of the Superlink these will work with models that show no CA or UK markings on the back of the device.

The US model is the one recommended for operation in Australia / New Zealand

Battery-powered SuperLink sensor that detects water leaks, temperature, humidity, and ambient light.

The sensor is equipped with multiple leak detection points:

  • Flood detection: Two sets of contact points on the bottom of the device sense the presence of standing water.
  • Drip detection: A dedicated set of contact points on the top of the device detects leaks from above, such as dripping pipes or condensation.
  • External probes: A 3.5mm port allows connection of compatible third-party leak detection probes for expanded coverage.

Customised notifications for leak or out-of-range events can be configured in Alarm Manager. Once configured, UniFi Protect instantly sends out a push notification or webhook and logs the event in the dashboard.

The sensor normally operates in a low-power sleep mode, but pressing the function button temporarily wakes it up and forces it to synchronise with the SuperLink Gateway. When pressed, the sensor is also highlighted in the devices page of UniFi Protect making it easy to identify the device.

Frequently asked questions5 questions
What does the SuperLink Environmental Sensor detect?
It detects water leaks, temperature, humidity and ambient light. It is a battery-powered SuperLink sensor.
How does it detect leaks?
Two sets of contact points on the bottom sense standing water, and a dedicated set on the top detects drips or condensation from above. A 3.5mm port also lets you connect compatible third-party leak detection probes.
Is this the right version for Australia and New Zealand?
Yes, the US model is the one recommended for operation in Australia and New Zealand. It works with models that show no CA or UK markings on the back of the device.
How do I get alerts when something is out of range or leaking?
Customised notifications for leak or out-of-range events can be set up in Alarm Manager. UniFi Protect then sends a push notification or webhook and logs the event in the dashboard.
What does the function button do?
The sensor normally stays in a low-power sleep mode. Pressing the function button wakes it and forces it to synchronise with the SuperLink Gateway, and highlights the sensor on the devices page of UniFi Protect so you can identify it.



Click HERE to access the Installation Guide

Click HERE to access the Datasheet

Specifications24 specifications · 4 sections
Overview
DimensionsDevice: 53 x 49 x 23.5 mm / (2.1 x 1.9 x 0.9") / Mount: 41.3 x 36.6 x 3.1 mm / (1.6 x 1.4 x 0.1")
WeatherproofingIPX5
MountingAdhesive, magnet and screw mount
UniFi Application SuiteProtect
Performance
ConnectivitySuperLink (Proprietary)
Operating Frequency · SuperLinkUS: 915.6–927.6 MHz / EU: 865.1–869.5 MHz / JP: 920.5–922.3 MHz
Antenna Gain · SuperLink0 dBi
Max. TX Power · SuperLink14 dBm
Max. Range · SuperLink2 km (1.2 mi)
Sensor Features · Other3.5 mm AUX jack (TRS or TS) for water leak probe
Hardware
Max. Power Consumption34.9mW
Supported Voltage Range3V
Power MethodLithium battery CR123A
Battery LifeUp to 6 years
WeightDevice: 47.8 g (1.7 oz) / With mount: 70 g (2.5 oz)
Enclosure MaterialPolycarbonate
Mount MaterialGalvanized steel
Buttons(1) Factory reset / (1) Function button
LEDs(1) Status: R/B/W / (1) Signal: B/R
Ambient Operating Temperature-20 to 40° C (-4 to 104° F)
Ambient Operating Humidity10 to 90% noncondensing
CertificationsFCC, IC, CE
Software
Application Requirements · Web ApplicationUniFi Protect
Application Requirements · Mobile AppUniFi Protect iOS™ and Android™
Source: Ubiquiti technical specifications, checked 14 Nov 2026.Model USL-ENVIRONMENTAL-US · Ubiquiti's spec sheet

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

USL-Environmental Ubiquiti SuperLink Environmental Sensor (EU Version)
Ubiquiti

USL-Environmental-US Ubiquiti SuperLink Environmental Sensor (US Version)

$101.48 AUD

Please note that there are two versions of the Superlink these will work with models that show no CA or UK markings on the back of the device.

The US model is the one recommended for operation in Australia / New Zealand

Battery-powered SuperLink sensor that detects water leaks, temperature, humidity, and ambient light.

The sensor is equipped with multiple leak detection points:

Customised notifications for leak or out-of-range events can be configured in Alarm Manager. Once configured, UniFi Protect instantly sends out a push notification or webhook and logs the event in the dashboard.

The sensor normally operates in a low-power sleep mode, but pressing the function button temporarily wakes it up and forces it to synchronise with the SuperLink Gateway. When pressed, the sensor is also highlighted in the devices page of UniFi Protect making it easy to identify the device.

View product